Silicone Case for AirPods Pro

Trash Box - Silicone Case for AirPods Pro

OBD-II Serial CAN Bus Dev Kit

OBD-II CAN Bus RF Dev Kit

I2C CAN Bus Module

I2C CAN Bus Module uses I2C for communication. The module is small and flexible, which makes it quickly used in any system with an I2C interface.
$19.90
Availability: In stock
SKU
1030017
  • Buy 5 for $18.91 each and save 5%
  • Buy 10 for $17.91 each and save 10%
  • Buy 50 for $15.92 each and save 20%

CAN Bus 2.0

We have launched Serial CAN Bus Module years ago, which is very practial and easy to use. Now we have slightly modified the Serial CAN Bus Module, rewrote a special firmware, and release this I2C CAN Bus Module.

I2C CAN Bus Module uses I2C for communication. The module is small and flexible, which makes it quickly used in any system with an I2C interface.

The Module is based on the high-performance MCP2515 CAN Bus controller and MCP2551 CAN Bus transceiver, provides an up-to-1Mb/s CAN Bus communication rate.

In addition, there is an Atmega168PA microcontroller on the module, so that you can also program it through a USB to Serial board, and modify the firmware or write your application directly.


Part List:

  • • I2C CAN Bus Module x1
  • • HY2.0 4-Pin Cable x1
  • • Screw Driver x1

Features:

  • • I2C to CAN Bus Conversion
  • • Default I2C Address 0x25
  • • Max I2C Speed: 400k
  • • Work with Arduino/BeagleBone board/Pi or any MCU that integrated with I2C
  • • Up to 1Mb/s CAN Bus baud rate (default 500k)
  • • TX and RX led indicator for CAN Bus
  • • 4-pin HY connector
  • • 3.3/5V working voltage
  • • Easy-to-use Arduino library
  • • Compitable with Grove system of Seeed Studio
  • • Small size: 20x40 mm

References:


PCS:

The above product not fully meet your needs? 

You can try PCS (Product Customization Service).

Write Your Own Review
You're reviewing:I2C CAN Bus Module
We found other products you might like!