Arduino CAN FD Dev Kit

CANBed FD - Arduino CAN FD Dev Kit

CANBed - Arduino CAN Bus Dev Kit

CANBed - Arduino CAN Bus Dev Kit carries an Atmega32U4 chip and MCP2515, MCP2551 CAN Bus controller and transceiver to realize the CAN Bus communication protocol on a single board without other MCU to control, it is a CAN Bus Development Board itself!
Special Price $19.90 was $24.90
Availability: In stock
SKU
1030008
  • Arduino CAN Bus Board

    CAN Bus is a common protocol and widely used in industry due to its long travel distance, medium communication speed, and high reliability. Now you can realize a CAN-BUS project through this tinny little development board. Different from CAN-BUS shield series that we have released, CANBed - Arduino CAN Bus Development Kit embed an Atmega32U4 chip, which means you don’t need to add other jump wires to another Arduino Board, it is an Arduino board itself!

    Because of the Atmega32U4 onboard chip, this board has rich resources in pins. As a matter of fact, there are 18 pins based on core chip set up on the board, which include digital pins, analog pins, UART, and I2C interface. Besides, this CANBed adopts MCP2515 CAN Bus controller with SPI interface and MCP2551 to achieve the CAN-Bus capability. There are also two kinds of CAN Bus interface for various demands which are sub-D9 connector and terminal block interface. They would fit all your need in the connecting method.

    This CAN-Bus development board is perfectly compatible with Arduino IDE. With the help of the Arduino CAN-Bus library, you will save plenty of time for your CAN project.


    Part List:

    Arduino CAN Bus Part List

    • 1.  CANBed PCBA x1
    • 2.  Sub-D connector x1
    • 3.  4-pin Terminal x1
    • 4.  HY2.0 4-pin Connector x2
    • 5.  9x2 2.54 Header x1
    • 6.  3x2 2.54 Header x1
    • 7.  6-pin switch x1

    Features:

    Arduino CAN Bus chip

    • ● Atmega32U4 with Arduino Leonardo bootloader on the board
    • ● MCP2515 CAN Bus controller and MCP2551 CAN Bus transceiver
    • ● OBD-II and CAN standard pinout selectable at sub-D connector
    • ● Compatible with Arduino IDE

    Specifications:

    • ● MCU: Atmega 32U4 (with Arduino Leonardo bootloader)
    • ● Clock Speed: 16MHz
    • ● Flash Memory: 32KB
    • ● SRAM 2.5KB EEPROM: 1KB
    • ● Operate Voltage (CAN-BUS) : 9-28V
    • ● Operate Voltage (MicoUSB):  5V
    • ● Input Interface: Sub-D

    Pinouts:

    Pinouts of Arduino CAN Bus


    ECCN/HTS:

    • ● HSCODE: 8543709990
    • ● USHSCODE: 8517620090

    References:


    PCS:

    The above product not fully meet your needs? 

    You can try PCS (Product Customization Service).


    Payment Method

    Payment Method:

    • ● Paypal is the preferred and most efficient payment method on our website.
    • ● If you are inconvenient to pay with Paypal, bank wire transfer is also supported. You can tell us the product and quantity you need through order@longan-labs.cc. We will deal with your e-mail in time and send back a quotation to you. Goods would be delivered after payment checked and a track code would be provided to you.

    Logistics

    Logistics:

    • ● Your package will be delivered from China and most countries all over the world are accessible.
    • ● 4PX is the logistics provider by default. The shipping fee starts as low as $5 and the delivery time is 7-10 days for north America and Europe. You can go to Logistice page to know the details of shipping fee and delivery time.
    • ● If you hope to receive your package faster, you can contact order@longan-labs.cc to choose DHL or Fedex.

    After-sales Policy

    After-sales Policy:

    • ● All of our products are strictly tested before delivered. But due to transportation and other factors, it is still possible to result in a defective product.
    • ● If you receive products fail to work, contact our tech-support engineer through support@longan-labs.cc who will answer the e-mail within 24 hours and guide you to check the problems.
    • ● After checked that it is a defective item, you can choose to get a refund or a new product without sending the existing one back.

    About Longan Labs

    About Longan Labs:

    Longan Labs is an international platform offering open source products and customized service for global makers. It is also a co-creation laboratory, co-working with makers and connecting the project to customers. Our offering includes CAN Bus dev board, electronic modules for popular MCU platform and other open source hardware gadgets. We also provide PCS (Product Customization Service), developing controller board and modules as the requirement of makers and start-up teams.

    Longan Labs is based on Shenzhen which has the most complete R&D and manufacturing resources. Core team members have over 10 years of experience running open source hardwar projects and cover many fields including engineering, design, manufacture, supply chain, logistics, sales and tech support. As this Longan Labs can provide an one-stop product developing service, from electronic circuits, software coding, PCB layout and assembly, to industrial design, structure and molding, brand and graphic design.

    Longan is a kind of Chinese fruit we all love it. We started from a small maker project at the summer of 2014 when it is the best time to enjoy longan. And we found the company to offer more products and better service at the spring of 2018. The initial idea of Longan Labs comes form maker culture and open source hardware, the corporate vision is helping global makers and open source society.

  • Write Your Own Review
    You're reviewing:CANBed - Arduino CAN Bus Dev Kit
    We found other products you might like!